UV경화기전문생산업체-mstech

본문 바로가기
무제 문서
OUR
GOODS

이 페이지의 내용을 보려면 최신 버전의 Adobe Flash Player가 필요합니다.

Adobe Flash Player 내려받기

  • 상단으로바로가기

UV Curing Facility

 SHEET TO SHEET UV CURE SYSTEM (NANO PRINTED ELECTRONIC)
 
APPLICATIONS Nano Imprinting UV System( UV Coating & Printing )
Model No. MSSTS-20KO
Light Source MERCURY+METAL HALIDE+GENERAL UV LAMP
Power Supply AC 3Φ / 220.380.440V/50.60HZ
Cooling System AIR COOLING
IRRADIATION STS CONVEYOR TYPE. (SHEET TO SHEET)
Valid Exposure Width 1,000~2,000mm
Reflector COLD MIRROR , HOT MIRROR
OPTION COLD MIRROR , HOT MIRROR,UV SENSOR
  • Glass and optimized for various sheet products.
  • Ease by UV irradiation amount adjusted to the value required by the diversification of a wide range of UV intensity applied to the electronic ballast.
  • The ease of operation by the product obtained by meeting the low-temperature curing conditions to minimize strain.
  • UV LAMP allows the application of different standards according to the product type and wavelength suitable for research needs.

 FOR SPECIAL PRODUCTS RTR UV CURE SYSTEM
 
APPLICATIONS Optical Film & SAP Coating & Printing
Model No. MSRTR-24KO
Light Source MERCURY+METAL HALIDE+GENERAL UV LAMP
Power Supply AC 3Ø / 220.380.440V/50.60HZ
Cooling System AIR COOLING
IRRADIATION RTR TYPE
Valid Exposure Width 1,000~2,000mm
Reflector COLD MIRROR , HOT MIRROR
OPTION COLD MIRROR , HOT MIRROR,UV SENSOR
  • Applied to a variety of possible Coater, RTR & STS equipment.
  • Ease caused by UV irradiation intensity adjusted to the value required by the applicable diversification broad UV irradiation electronic ballast.
  • Ensuring ease of operation due to variations FILM minimized by meeting the low-temperature curing conditions.
  • UV LAMP can be applied by the product types of a number of standard and adequate for the required wavelength irradiation.

Flexible Double Sided UV Curing System
 
APPLICATIONS PCB,FPCB, OPTICAL FILM
Model No. MSCOM-9KO
Light Source General UV Lamp + Metal Halide UV Lamp
Power Supply AC 3Φ/ 220V/380V 60㎐/50㎐
Cooling System Air-Cooling
Valid Exposure Width 510mm x 610mm
Reflector COLD Mirror, HOT Mirror
Dimension( W x D x H ) 2000 * 800* 1300
  • This equipment is a suitable model for producing PSR and marking Cure of various PCBs such as BGA and FPCB etc.
  • It can be used in various PCBs and is a model made with a purpose of low temperature curing by applying effective cooling system.e
  • Easy setting and control of needed UV energy are available by applying Power Controller which is able to adjust output of the lamp
  • Designed for easy maintenance by using PLC Controller and Touch Panel etc. .
  • To apply Quartz roll or 3 Point roll according to products to be produced.
  • To discharge products with a temperature near to ambient temperature by installing a cooler at the feeding slot and the discharge slot.


UV Printing Conveyer System
 
APPLICATIONS UV Printing and Coating such as various Papers and iron plates
Model No. MSCOM-20KO
Light Source General UV Lamp + Metal Halide UV Lamp
Power Supply AC 3Φ/ 220V/380V 60㎐
Cooling System AIR COOLING
Valid Exposure Width 200 OR 250
Reflector Focused Aluminum Mirror / COLD Mirror
Dimension( W x D x H ) 4000 * 1500 * 800 Quartz Mirror,
  • This is equipment to cure products by conveyer system after UV printing and coating on products.
  • This is equipment to cure products by conveyer system after UV printing and coating on products.
  • To maximize the lamp efficiency by mounting a high irradiation reflection film on the lamp reflector.
  • To mount UV Filter as minimize the heat on products
  • To achieve high efficient UV Flux and high leveled Beam Uniformity
  • System status is displayed through various indicators
  • To discharge products safely by using adsorption system


Drawer Type UV Curing System
 
APPLICATIONS

Small sized products

Model No.

MSCM-1.5KO

Light Source

Mercury UV Lamp + Metal Halide UV Lamp

Power Supply

AC 3Φ / 220V/380V  60㎐

Cooling System

Forced Air Cooling

Valid Exposure Width

90~140mm Variable Type

Reflector

AL OR Cold Mirror  

Dimension( W x D x H )

1,000 x 500 x 600

Option Cold Mirror,I,R Filter

This is an UV Curing System which everybody could operate and install easily because the operation is simple.
Suitable to sue in a laboratory or an institute


Small sized Printing Curing System
 
APPLICATIONS

Various Small Sized Printing Materials

Model No.

MSCM-3~4KO

Light Source

Mercury UV Lamp &Metal Halide UV Lamp

Power Supply

AC 3Φ / 220V/380V 60㎐  

Cooling System

Air Cooling

Valid Exposure Width

90~150mm Variable

Reflector

Focused Aluminum Mirror

Dimension( W x D x H )

(Irradiator) 630 x 300 x 130 (T,R BOX) 550 x 450 x 550

Option Cold Mirror,I,R Filter
  • Suitable to UV labeling or printing computer forms
  • Possible to reduce heat damage of the products by applying shutter system to the lamp unit.
  • Easy to mount in the narrow space.


Line UV Curing System for Wood and Floor Material
 
APPLICATIONS

Wood, MDF, Floor Material and large size products.

Model No.

MSCM-10KO

Light Source

Mercury UV Lamp &Metal Halide UV Lamp

Power Supply

AC 3Φ / 220V/380V 60㎐  

Cooling System

Air Cooling

Valid Exposure Width

100 * 150 mm Variable

Reflector

Focused Aluminum Mirror

Dimension( W x D x H )

2000 * 300 *350

  • Suitable to coat the wood and floor material
  • To improve productivity by curing the large sized products within a short time.
  • Possible to remote control interlocking with power device and easy operation and maintenance due to the display of equipment’s status and failure shape by applying Display Meter.



General Purpose UV Conveyer Curing System
 
APPLICATIONS

Producing Optical Film and Other Products

Model No.

MSCOM-4.5KO

Light Source

Mercury UV Lamp &Metal Halide UV

Power Supply

AC 3Φ/220 V/60㎐ /

Cooling System

Air Cooling

Valid Exposure Width

100 * 200nm

Reflector

cold morror + Others

Dimension( W x D x H )

1200 * 520 * 1500

Option Cold Mirror,I,R Filter

  • This equipment is a model used for applications such as coating FPC which is sensitive to temperature and film kinds and cohesion and Nano-technology. It is equipped with various optical filters and air knifes in order to keep the temperature of the product surface low and the valid exposure width is variablel
  • Designed to dispose the products easily being Suntan Film, Polarizer Film and Hologram type.
  • Designed to dispose the products easily being a Conveyer Type to which Tilt-Prevention System is applied.
  • Excellent Compatibility with various light sources and Lamp Power is variable.
  • Easy maintenance and troubleshooting.
  • Mechanical, electrical and optical durability are secured and operation is easy.


203HO , INCHEOL TECHNOVAIIEY,SEOKCHEON-RO 453,BUCHEON-SI,GYEONGGI-DO,KOREA
TEL:+82-32-677-6362 FAX:+82-32-677-6369
Copyrightⓒ 2010 MS TECH CO.,LTD All rights reserved.

Malaysia Office

ADD: B-23A-28 THE SCOTT SOHO 4 1/2 MILES OLD KLANG ROAD 58000 KUALALUMP MALAYSIA TEL 60-3-79717029 HP 60-012-974-8350 JAMES CHOI
Prohibition of unauthorized collection of email address